You are viewing an old version of this page. View the current version.
Compare with Current View Page History
« Previous Version 2 Current »
Link 2500 Terminal Unit
User Guide
Power Adapters (U.S. and International)
USB Charging Cable with USB-C (smaller end) and USB-A connector (larger end)
There is a USB-C connector on the right side of the wireless terminal.
Plug the USB cable - USB-C connector to the right side of the terminal.
Slide the U.S. power adapter on the power supply.
Connect the USB cable - USB-A connector to the power supply.
Plug the power supply into a power outlet.
Turn on the terminal by holding down the green button.
Turn off the terminal by holding down the .,#* and yellow key at the same time until the screen shows “Shutdown in Progress”.
Type 2, 6, 3, 4 on the terminal.
Press F for menu
Press F3 and scroll to Terta Admin
Press F3 and scroll down to Configure WiFi
Enable WiFi by pressing the green button
Select Scan Networks
You will see a list of available networks. Select your WiFi network. Press the green button.
Enter the WiFi password. Press the green button.
Enable Bluetooth on your base station such as an iPad.
Type 2, 6, 3, 4 or 0, 0, 0, 1 on the terminal. You should see a menu displayed.
Press F3 to scroll down to the Bluetooth settings.
Press the green button.
Select Pair.
On the base station (iPad), select the Link 2500.
Press the green button on the terminal to complete the pairing.