Page Comparison

Ingenico – TETRA Link 2500

Contents of the Box

• Link 2500 Terminal Unit

• User Guide

• Power Adapters (U.S. and International)

• USB Charging Cable with USB-C (smaller end) and USB-A connector (larger end)

Charging the Link 2500

• There is a USB-C connector on the right side of the wireless terminal.

• Plug the USB cable - USB-C connector to the right side of the terminal.

• Slide the U.S. power adapter on the power supply.

• Connect the USB cable - USB-A connector to the power supply.

• Plug the power supply into a power outlet.

Turn the Link 2500 ON / OFF

• Turn on the terminal by holding down the green button.

• Turn off the terminal by holding down the .,#* and yellow key at the same time until the screen shows “Shutdown in Progress”.

Connecting the Link 2500 via WiFi

• Type 2, 6, 3, 4 on the terminal.

• Press F for menu

• Press F3 and scroll to Terta Admin

• Press F3 and scroll down to Configure WiFi

• Enable WiFi by pressing the green button

• Select Scan Networks

• You will see a list of available networks. Select your WiFi network. Press the green button.

• Enter the WiFi password. Press the green button.

Connecting (paring) the Link 2500 via Bluetooth

• Enable Bluetooth on your base station such as an iPad.

• Type 2, 6, 3, 4 or 0, 0, 0, 1 on the terminal. You should see a menu displayed.

• Press F3 to scroll down to the Bluetooth settings.

• Press the green button.

• Select Pair.

• On the base station (iPad), select the Link 2500.

• Press the green button on the terminal to complete the pairing.