Need to upgrade your ID TECH VP 3300 or Augusta to the latest firmware to use with our PayGuardian iOS or Android product?  This article references the current firmware versions and process to upgrade your VP3300 device.

Current Firmware Versions

VP3300: NEO v1.10.035
Augusta: v1.03.019

SDK Demo App

https://idtechproducts.atlassian.net/wiki/download/attachments/71697978/dot NET SDK Demo.zip?api=v2

Installing a Config in the SDK Demo Desktop App

1. Download and Install this tool: https://idtechproducts.atlassian.net/wiki/download/attachments/71697978/dot NET SDK Demo.zip?api=v2

2. Download the Config File:

   1. Both Augusta and VP3300 Configs can be found here: IDTECH Devices

3. Connect the Device to a USB port on your computer (Ensure the device appears)

4. Click “Open Config From File” and select the radio button “Open “ViVOconfig”

5. Click “Set Config From File

6. Choose “Write File On Incorrect Checksum” or “Open choose “Write File On Incorrect Checksum and Repair File”

7. A window will pop up for you to select the config file Click 'Execute Command”

8. Choose Config File from your computer downloaded in step #2.

9. Click “Write”

10. Click “Yes” on Write Confirmation screen2 and click OK

11. Config will install. Should see a “Finished loading profile to device successfully message.” A popup will appear confirming the installation.

Updating Firmware in the ViVOconfig Desktop App

1. Download and Install this tool: https://idtechproducts.atlassian.net/wiki/download/attachments/71697978/dot NET SDK Demo.zip?api=v2

2. Download the Firmware File:

   1. VP3300 Device: https://idtechproducts.atlassian.net/wiki/download/attachments/71697978/VP3300BT-New Kernel Firmware Upgrading Package.zip?api=v2

   2. Augusta Device: https://idtechproducts.atlassian.net/wiki/download/attachments/71697978/Firmware Update Package Augusta .zip?api=v2

3. Connect the Device to a USB port on your computer (Ensure the device appears)

4. Under Commands, expand “Device”

5. Click “Update Device Firmware” and click “Execute Command”

6. A window will pop up for you to select the Firmware file from your computer downloaded in step #2.

7. Unzip the downloaded Firmware file.

8. VP3300 Only - If Current Firmware version is lower than 1.05.XXX you will need to first install the “VP3300 Bluetooth NEO v1.05.006_USBHID.txt” file and then install the “VP3300 Bluetooth NEO v1.10.035_USBHID.txt” file (You might have to change the windows explorer to show all file types) More information can be found here: https://idtechproducts.atlassian.net/wiki/spaces/KB/pages/71749529/Updating+the+VP3300+and+VP8300+Kernel+from+1.01+to+1.10

9. Select the TXT file you want to install and click “Open” in windows explorer

10. Install starts - Device will Beep.

11. Install will complete. Firmware Update Successful will display in ViVOconfigFirmware will install. A message in the SDK Demo app will appear confirming the Firmware installation was successful.

EMV Declining 

If EMV transactions are declining, check to see if encryption is turned on for the device using ID TECH’s USDK Demo tool. 

Click on Files, select uDEMO.zip and follow set-up instructions.

Now that you have the USDK Demo tool installed, complete the form as shown below in the screen shot with the following entries:
Cmd: C7
Sub: 36
Data: 00

Click on “Execute Command”
If you receive “successful,” then you have the proper key injected. If your device is properly encrypted but EMV transactions still declining, please contact BridgePay’s Integration Support for further device troubleshooting.
If you receive “Command Failed,” please reach out to BridgePay’s Integration Support as your device does not have the proper key injected and will need to be reinjected.