Need to upgrade your ID TECH VP 3300 or Augusta to the latest firmware to use with our PayGuardian iOS or Android product?  This article references the current firmware versions and process to upgrade your VP3300 device.

Current Firmware Versions

VP3300: NEO v1.10.035
Augusta: v1.03.019Current

SDK Demo

App

https://idtechproducts.atlassian.net/wiki/download/attachments/71697978/dot NET SDK Demo.zip?api=v2

Installing a Config in the

SDK Demo Desktop App

1. Download and Install this tool: https://idtechproducts.atlassian.net/wiki/download/attachments/71697978/ViVOconfigdot NET SDK Demo.zip?api=v2

2. Download the Config File:

   1. Both Augusta and VP3300 Configs can be found here: IDTECH Devices

3. Connect the VP3300 Device to a USB port on your computer (Ensure the device appears)

   You can tell its connected in the ViVOconfig App

   Image Removed

4. Click “Open Config From File” and select the radio button “Open File On Incorrect Checksum” or “Open File On Incorrect Checksum and Repair File”

   Image Removed

5. A window will pop up for you to select the config file from your computer downloaded in step #2.

6. Click “Write”

   1. Image Removed

7. Click “Yes” on Write Confirmation screen

   Image Removed

8. Config will install. Should see a “Finished loading profile to device successfully message.”

   1. Image Removed

Updating Firmware in the ViVOconfig Desktop App

1. Download and Install this tool: https://idtechproducts.atlassian.net/wiki/download/attachments/71697978/ViVOconfigdot NET SDK Demo.zip?api=v2

2. Download the Firmware File:

   1. VP3300 Device: https://idtechproducts.atlassian.net/wiki/download/attachments/71697978/VP3300BT-New Kernel Firmware Upgrading Package.zip?api=v2

   2. Augusta Device:

3. Connect the VP3300 Device to a USB port on your computer (Ensure the device appears)You can tell its connected in the ViVOconfig App

4. Image Removed

5. Under Commands, expand “Device”

6. Click “Update Device Firmware” and click “Execute Command”

7. A window will pop up for you to select the Firmware file from your computer downloaded in step #2.

8. Unzip the downloaded Firmware file.

9. If Current Firmware version is lower than 1.05.XXX you will need to first install the “VP3300 Bluetooth NEO v1.05.006_USBHID.txt” file and then install the “VP3300 Bluetooth NEO v1.10.035_USBHID.txt” file (You might have to change the windows explorer to show all file types) More information can be found here: https://idtechproducts.atlassian.net/wiki/spaces/KB/pages/71749529/Updating+the+VP3300+and+VP8300+Kernel+from+1.01+to+1.10

10. Select the TXT file you want to install and click “Open” in windows explorer

11. Install starts - Device will Beep.

12. Install will complete. Firmware Update Successful will display in ViVOconfig.

Image Removed

EMV Declining 

If EMV transactions are declining, check to see if encryption is turned on for the device using ID TECH’s USDK Demo tool. 

Click on Files, select uDEMO.zip and follow set-up instructions.

Now that you have the USDK Demo tool installed, complete the form as shown below in the screen shot with the following entries:
Cmd: C7
Sub: 36
Data: 00

Click on “Execute Command”
If you receive “successful,” then you have the proper key injected. If your device is properly encrypted but EMV transactions still declining, please contact BridgePay’s Integration Support for further device troubleshooting.
If you receive “Command Failed,” please reach out to BridgePay’s Integration Support as your device does not have the proper key injected and will need to be reinjected.